BARLY – № 1 COPPER WIRE
To consist of №.1 exposed, no coating, non-alloy wire, not smaller than № 16 B & S gauge of wire. Malachite wire and hydraulically pressed material are subject to agreement between buyer and seller.
BERRY – № 1 COPPER WIRE
To consist of pure wire, without tin, without cover, non-alloy wire, not smaller than № 16 B & S gauge of wire, friable. Hydraulic briquetting is a subject of agreement.
BIRCH – № 2 COPPER WIRE
To consist of mixed, non-alloy copper wire, with nominal copper content of 96% (min. 94%), determined by electrolyte analysis. Copper wire with excessive lead coating, alloyed, welded; bras and bronze wire; with excess of fat content, steel and non-ferrous materials; copper wire of heating, insulated wire; filamentary wire; on a general basis without ash. Hydraulic briquetting wire is subject of agreement.
CANDY – HEAVY COPPER
To consist of pure, non alloy, no coating, copper clippings, trimmings, spikes, collector segments and wire with thickness not less than 1/6 inches, no burned friable wire; but may include copper pipes. Hydraulic briquetting of copper is subject to agreement.
CLIFF – № 2 COPPER
To consist of different, non-alloy copper scrap with nominal copper content of 96% (min. 94%), determined by electrolyte analyze. Should not be: with excessive lead coating, alloyed, welded copper wastes; brass and bronze clippings; with excess of fat content, steel and non-ferrous materials; copper pipes with other than copper connective elements or sediments; copper wire from heating with insulation; filamentary wire; on a general basis without ash.
Hydraulic briquetting of copper is subject to agreement.
CLOVE – № 1 COPER NODULE WIRE
To consist of № 1 exposed, no coating, non-alloy copper nodule wire, cut or tear, no tin, lead, zinc, aluminum, iron, other ferrous materials, insulation and other pollutants. Minimum contents of copper: 99%. Gauge wire less than № 16 B & S and hydraulically pressed material is subject to agreement between buyer and seller.
COBRA – № 2 COPER NODULE WIRE
To consist of scrap № 2 non-alloy copper nodule wire, cut or tear with minimum 97% contents of copper. Maximum outer impurities are not more than 0, 50% aluminum and 1% of any other metals or insulation. Hydraulically pressed material is subject to agreement between buyer and seller.
COCOA – COPER NODULE WIRE
To consist of copper wire scrap, non-alloyed, cut or tear with minimum 99% content of copper. Not to consist of excessive insulation or other non-ferrous elements. The maximum content of non-ferrous materials is as follows: Aluminum – 0.05%, tin – 0.25% nickel – 0.05% antimony – 0.01% iron – 0.05%.
DREAM – LIGHT COPPER
To consist of various non-alloyed copper scrap with nominal content of copper 92% (min. 88%), which is determined by electrolyte analyze and shall consist of copper sheet, gutters, water pipes, caldron, boilers and similar crap. To be excluded from: burned, filamentary wire; copper armor; hanger for rack plating process; radiators, fire extinguishers, refrigeration units, electrotype shells; siftings; sealed, tinned and excessive scrap tin coating; brass and bronze details; with no excessive oil, iron and non-ferrous particles; on a general basis without ash. Hydraulic briquetting of copper is subject to agreement between the buyer and the seller. All elements, exempt of this category are also exempt from higher categories above.
DROVE – SCRAP WITH COPPER CONTENTS
To consist of various materials: butt-containing slag, turnings, ash, steel-brass and copper slag. To be exempt from insulated conductors; copper chloride; unripe mixed material; large motors; asbestos brake pad; furnaces bottoms; materials with high lead content; graphite crucible; as well as harmful and explosive materials. Fine powder: according to agreement. Hydraulic briquetting material is subject to the agreement.
DRUID – SCRAP OFINSOLATED COPPER CONDUCTOR
Consist of copper wire with various types of insulating material.
Sale based on a sample and coefficient of utilization, in agreement between the buyer and seller.
EBONY – CONTENTS OR RED BRASS (TOMPAK)
To consist of red brass, flaps, machine bearings and other machine parts including different copper castings, tin, zinc and / or lead. Exempt from semi-red brass castings (78% to 81% copper); boxes for railway coaches and other alloys with high lead content; water taps and valves; water meters; flaps; brass ingots; aluminum, silicon and manganese bronze; iron and non-metallic particles. None of the elements is greater than 12” in any part and do not weigh more than 100 lbs.