FERUS METALS

FERUS METALS

+359 888 971757

Yavor Y. Stefanov

NONFERUS METALS

NONFERUS METALS

+359 887 428571

Katerinka K. Ilieva

SCRAP CARS

SCRAP CARS

+359 879 222864

Valentin V. Terziysky

OLD OILS

OLD OILS

+359 884 085183

Boris B. Klisursky

EL. APPLIANCES

EL. APPLIANCES

+359 887 428110

Kalina K. Koleva

FERUS METALS

FERUS METALS

+359 888 971757

Yavor Y. Stefanov

NONFERUS METALS

NONFERUS METALS

+359 887 428571

Katerinka K. Ilieva

SCRAP CARS

SCRAP CARS

+359 879 222864

Valentin V. Terziysky

OLD OILS

OLD OILS

+359 884 085183

Boris B. Klisursky

EL. APPLIANCES

EL. APPLIANCES

+359 887 428110

Kalina K. Koleva

Aluminum

 

TABLET – CLEAN ALUMINUM LITOGRAPHIC SHEETS
To consist of alloys 1100 and/or 3003, no paper, no plastic, not too oily sheets and other pollutants. Be at least 3 inches in each direction.

TABLOID – NEW CLEAN ALUMINUM LITOGRAPHIC SHEETS
To consist of alloys 1100 and/or 3003, no paint, no paper, no plastic or too oily sheets and other pollutants. Be at least 3 inches in each direction

TABOO – MIXED ALUMINUM CLIPPINGS AND HARD PARTICULES WITH LOW CONTENTS OF COPPER
It consists of new, clean, no cover, no paint, aluminum scrap with a low content of copper, by two or more alloys and has no series 7000, foil, filamentary wire, wire grid, dirt and other substances. Fat and grease not to be more than 1%, also no clippings with size less than 5 inches. New can be supplied according to agreed between buyer and seller.

TAINT/TABOR – CLEAN MIXED OLD ALUMINUM ALLOY SHEET
It consists of clean old alloy aluminum sheet and sheet scrap of two or more alloys, free from alloys series 7000, foil, shutters, castings, filamentary wire, wire grid, containers for food and beverages, fabric, printed caps, radiators’ casings, air foil sheet, drums of oil, bottle caps, plastic, dirt and other substances. Fat and grease should not exceed a total of 1%. Painted sheet, edgings and lanes are admitted to 10%.

TAKE – MATERIAL OF NEW ALUMINUM CANS
It consists of material and clippings from new and with low contents of copper aluminum cans, clean, lithographic or not, covered with a clear gloss, but without lids with protective cover, iron, dirt and other contaminants. Oil does not exceed 1%.

TALAP – MATERIAL OF OLD CAN BOXES
It consists of clean, old aluminum cans, decorated or smooth, without iron, dirt, liquids and/or other contaminants.

TALCRED – SCRAP FROM CUT ALUMINUM BEVERAGE CANS (UBC)
Their density is 12 to 17 pounds of cubic feet. The material is up 5% fine, with less than 4 chow (standard size for a network in the U.S.). Material IS magnetic divided, without steel, lead, plugs for bottles, plastic cans and other plastics, glass, wood, dirt, grease, household waste and other impurities. Any pure lead is grounds for refusal. Any and all aluminum details, except used beverage cans are not accepted. Items not included in the specification, including moisture, are subject of a separate agreement between buyer and seller.

TALDACK – SOLID SCRAP OF USED ALUMINUM BEVERAGE CANS (UBC)
Must be block density of 35 to 45 pounds of cubic feet. Each block should not exceed 60 pounds. Nominal block size is between 10 to 13 inches. Have a belt notch in all directions, to facilitate in connecting beams. All blocks of the bundle must be of equal size. Size: acceptable sizes of beam are 41 to 44 inches x 51 inches to 54 inches x 54 to 56 inches (height). The only acceptable way to put is as follows: using 5 / 8 inches wide of 0.20 inches thick, steel bands, such as beams to tie with a vertical bar order and at least two longitudinal (horizontal) band of a beam. Using of beams for sliding and/or supporting sheets of any material is not acceptable. Material is magnetic divided, without steel, lead, plugs for bottles, plastic cans and other plastics, glass, wood, dirt, grease, household waste and other impurities. Any pure lead is grounds for refusal. Any and all aluminum details except used beverage cans are not accepted. Items not included in the specification, including moisture, are the subject of a separate agreement between buyer and seller.

TALDON – BALLED SCRAP OF USED ALUMINUM BEVERAGE CANS (UBC)
Have a minimum density of 14 lbs. of cubic feet and max. density o 17 lbs. of cubic feet for not pressed UBC. Size: minimum 30 cubic feet, at allowable size of the bale from 24″ to 40″, from30” to 52″, from 40″ to 84″. The only acceptable way to joint is as follows: four to six 5/8 x 0.20″ steel bands, or six to ten steel wire gauge № 13 (aluminum bands or wires are acceptable in equivalent strength and number). The use of beams for sliding and or support sheets of any material is not acceptable. Material is magnetically divided, without steel, lead, plugs for bottles, plastic cans and other plastics, glass, wood, dirt, grease, household waste and other impurities. Any pure lead is grounds for refusal. Any and all aluminum details, except used beverage cans are not accepted. Items not included in the specification are subject to a separate agreement between buyer and seller.

TALDORK – BRIQUETTED SCRAP OF USED ALUMINUM BEVERAGE CANS (UBC)
Briquettes are with density from min 50 pounds of cubic feet. Nominal size of briquettes is between 12 and 24 inches x 12 to 24 inches, with the same profile with different lengths of at least 8 inches and a maximum of 48. Briketite will be arranged on links or packages on sliders boards and are secured with at least a vertical bar order at a row and at least one longitudinal bar horizontal layer. Briquettes do not go beyond the pallet. The total height of the package to be max. 48 inches. Bar to be at least 5/8 ” wide and 0.20″ thick steel ring or other equally strong. The weight of each bundle must not exceed 4000 pounds. The material must be magnetically purified by any steel, plastic, glass, unclean, and any other impurities. Any and all aluminum details, except those of UBC are unacceptable. Any free lead is basis for denial. Items not included in the specification, including moisture, are the subject of a separate agreement between buyer and seller.

TALE – PAINTED SIDINGS (RAILWAY LINES)
It consists of pure aluminum scrap edgings, low copper content, painted by one or two sides, without iron, dirt, corrosion, fiber backing or other pollutants.

TALENT –COATED SCRAP
It consists of panels of circuit boards, shutters, vinyl, plastic, etc. It is subject to a separate agreement between buyer and seller.

TALK – ALUMINUM AND COPPER RADIATORS
It consists of pure aluminum copper radiators and/or aluminum ribs of copper tubes, no brass tubes, iron and other contaminants.

TALL – ALUMINUM GLOBULES
Consists clean cut or tear aluminum, without meshwork, filamentary wire, iron, insulation materials, copper and other impurities. Without reticulated material 20. Contain at least 99.45% of aluminum.

TALON – NEW WIRE AND CABLE FROM PURE ALUMINUM
It consists of new, clean, non-alloy aluminum wire and cable without filamentary wire, iron, insulating materials and other impurities.

TANN – NEW WIRE AND CABLE FROM MIXED ALUMINUM
It consists of new, clean non-alloy aluminum wire and cable containing up to 10% wire and cable series of 6000, without filamentary wire, iron, insulation and other impurities.

TASTE – OLD WIRE AND CABLE FROM PURE ALUMINUM
It consists of old, non-alloy aluminum wire or cable containing not more than 1% free oxide or contamination without filamentary wire, iron, insulation and other impurities.

TASSEL – OLD WIRE AND CABLE FROM MIXED ALUMINUM
It consists of old, non-alloy aluminum wire or cable containing up to 10% wire and cable series of 6000, without filamentary wire, iron, a national material and other impurities.

TARRY – ALUMINUM PLUNGERS
А) Clean aluminum plungers. To consist of clean aluminum plungers, without struts, bush bearings, shafts, steel rings and any other impurities. Lubricant and grease not to exceed 2%.
B) Clean aluminum plungers with struts. To consist of clean aluminum plungers, without struts, bush bearings, shafts, steel rings and any other impurities. Lubricant and grease should not exceed 2%.
С) Iron-aluminum plungers. Be sold on the basis of possibility of recovery or with a separate agreement with the buyer.

TEENS – SEPARATED ALUMINUM DRILLING TURNINGS
Contains pure, aluminum without corrosion drilling cuttings and chips from a given alloy and are subject to discounts for satiety above 3% to 20 reticulate density, for pollution, free iron, lubricants, moisture and all other impurities. Material containing more than 10% iron and/or free magnesium or stainless steel or containing highly flammable waste are not considered suitable for delivery.

TELIC – MIXED ALUMINUM DRILLING TURNINGS
Contains pure, aluminum drilling turnings without corrosion of two or more alloys and is subject to discounts for satiety above 3% to 20 reticulate density, pollution, free iron, fat, moisture and other impurities. Material containing more than 10% iron and/or free magnesium or stainless steel or containing highly flammable waste are not considered suitable for delivery.

TENSE – MIXED ALUMINUM CASTINGS
Consist of clean aluminum castings which may contain auto and airplane castings but no block ingots and without iron, pollution, brass, Babbitt and any impurities. Lubricant and grease not to be more than 2%.

TEPID – BAD PLANE ALUMINUM SHEETS
Be sold on the basis of the possibility of recovery, or by a separate agreement with the buyer.

TERSE – NEW ALUMINUM FOIL
Consists of clean new foil, unalloyed and without aluminum coating without anode foil, radar foil and doublet reflectors, paper, plastic or other impurities. Hydraulic briquetting material – only by agreement.

TESTY – OLD ALUMINUM FOIL

Consists of clean, new foil, unalloyed and without aluminum coating without anode foil, radar foil and doublet reflectors, paper, plastic or other impurities. Hydraulic briquetting material – only by agreement.

THIGHT – CRUSHED ALUMINUM PARTICLES
Be sold on the basis of the possibility of recovery, or by a separate agreement with the buyer.

THIRL – ALUMINUM CINDER, SPRAY, PSILLED QUANTITIES, STUBS AND CLEANING WASTE
Be sold on the basis of the possibility of recovery, or by a separate agreement with the buyer.

THROB – ALUMINUM SOLDER
It consists of aluminum scrap, which is welded or melted in a form or shape, such as ingots, blocks or flat preparations to facilitate transportation. The material should not have corrosion, without cinder and other impurities. Sale based on sample or analysis.

TOOTH – NEW SEPARATED CLIPPINGS AND HARD PIECES OF ALUMINUM  ALLOY
It consists of new, clean, no cover, not painted aluminum scrap of one particular type of aluminum alloy, without foil, filamentary wire, wire mesh, dirt and other impurities. Lubricant and grease not to exceed a total of 1%. Furthermore, no cuts with size of less than 5 inches. New material from cans is subject to agreement between buyer and seller.

THOUGH – MIXED SEPARATED CLIPPINGS AND HARD PIECES OF ALUMINUM  ALLOY
It consists of new, clean, no cover, not painted aluminum scrap of one particular type of aluminum alloy 7000 series without foil, filamentary wire, wire mesh, dirt and other impurities. Lubricant and grease not to exceed a total of 1%. Furthermore, no cuts with size of less than 5 inches. New material from cans is subject to agreement between buyer and seller.

THREAD – NEW SEPARATED ALUMINUM CASTINGS, FORGINGS AND PRESSED PIECES
It consists of new, clean, no cover aluminum castings, forgings and pressed pieces of only one particular alloy, without waste, stainless steel, zinc, iron, dirt, grease, dirt and other impurities.

TRUMP – ALUMINUM CAR CASTINGS
Consists of any clean automobile castings of sufficient size so as to be easily distinguished without iron, dirt, brass, babbitt bush bearings, brass bush bearings and all other impurities. Lubricant and grease not to exceed 2%.

TWANG – SCRAP OF INSOLATED ALUMINUM ONDUCTOR
It consists of aluminum conductors’ scrap with various types of insulation. Sold on the basis of the sample or possibility of recycling it, by agreement between buyer and seller.

TWIST – ALUMINUM PLANE CASTINGS
It consists of clean aluminum castings from airplanes, without dirt and iron, brass, babbitt bush bearings, brass bush bearings and other impurities. Lubricant and grease not to exceed 2%.

TWITCH – SORTED ALUMINUM SCRAP (from car shredders)
On receiving the material must be dry and not to contain more than 3% maximum free zinc, 1% maximum free magnesium and 1.5% maximum free iron and stainless steel. It should not contain more than 5% maximum non-metals, of which no more than 1% tire or plastic. No too oxidised material. All deviations are sold with a separate agreement between buyer and seller.