Номенклатура ISRI Nomenclature

Nomenclature

Nomenclature for waste ferrous metals

codequalitydescription
921Thick Steel Scrap, above 4 mmmax. dimensions 1500 х 500 х 500 mm
thickness: over 4 mm
other admixtures: up to 1% of the net cargo weight
not to contain:
non-ferrous metals, slag, sculls, bales, briquettes, pressed or bulk steel wires, steel ropes, gas or oxygen cylinders, car tanks and large (heavy) solid pieces of scrap that cannot be cut.
923Thick Steel Scrap, above 10 mmmax. dimensions 1500 х 500 х 500 mm
thickness: over 10 mm
other admixtures: up to 1% of the net cargo weight
not to contain:
non-ferrous metals, slag, sculls, bales, briquettes, pressed or bulk steel wires, steel ropes, gas or oxygen cylinders, car tanks and large (heavy) solid pieces of scrap that cannot be cut.
930Pig Ironmax. dimensions 1500 х 500 х 500 mm
secondary metals, crushed or whole thick-walled machine parts, details, metal chills, etc
926Thick Steel Scrap, oversizemax. dimensions over 1500 х 500 х 500 mm
thickness: over 4 mm
920Thin Steel Scrap, under 3 mmmax. dimensions over 1500 х 500 х 500 mm
thickness: under 3 mm
thick scrap: up to 10% of the net cargo weight
other admixtures: up to 1% of the net cargo weight
car tanks are allowed only if empty and cut
not to contain:
steel wires, steel ropes, turnings, vehicle parts such as non-ferrous metals, tires and seats, burned tires, automotive batteries, uncut vehicle tanks, heavy/big pieces of scrap, zinc-plated, tin-plated and enamelled materials.
940Ferrous Turningssteel and pig iron turnings

Nomenclature for waste non-ferrous metals – copper / brass and bronze / aluminum / nickel / lead / zinc

CodeQualityDescription
80Copper, insulatedCopper cable, assessed as per metal content
100Copper, MilberryCopper wires, thickness above 1 mm, with shiny surface. Free of tin-plated ends and cable shoes. Not oily. Mechanically removed insulation.
120Copper, BerryCopper wires, thickness above 1.5 mm, not insulated. Free of any remaining insulation. Removed cable shoes.
130Copper, Birch/CliffCopper wires, thickness between 0.3 mm and 1.5 mm, not insulated. Removed lacquer cover.
140Copper, Mixed - thin, varnish, dishes, cadmium-platedCopper wires and pieces with lacquer cover. Whole coils excluded. Thickness above 0.3 mm.
190Copper turningsCopper turnings, free of metallic and non-metallic admixtures. Free of iron, sand and moisture.
191Copper wire hairCopper wires, thickness up to 0.3 mm. With or without lacquer covering.
CodeQualityDescription
210Brass Solids Mixed, HoneyYellow brass solids, sheets, strips, wires, clean brass rods, hexagons, plates and padlocks, rolled and drawn brass. Free from plastics, non-metallic admixtures and other metals. Impurities up to 0.1%.
220Brass Nickel-platedNickel-plated brass faucets and household fittings. Free from plastics, non-metallic admixtures and other metals. Impurities up to 0.1%.
240BronzeBronze bearing shells, gears, pieces, etc. with removed iron parts.
290Brass turningsBrass turnings, without iron and non-metallic admixtures. Free of sand, moisture and excess oil.
291Bronze turningsBronze turnings, clean from iron and non-metallic admixtures. Free of sand, moisture and excess oil.
400Brass and copper automobile radiatorsMixed brass and copper automobile radiators, without iron.
401Brass and copper automobile radiator partsParts of brass and copper automobile radiators, without iron.
CodeQualityDescription
500Aluminum conductor wireAluminum conductor wires, mechanically removed insulation. Oxidized wires from the high-voltage energy sector. Non-oily. Without cable shoes and sockets. Non-metallic admixtures up to 1%.
503Aluminum conductor moldingsAluminum transformer moldings. Non-metallic admixtures and impurities up to 1%.
510Aluminum soft non-painted /Taint/TaborAluminum sheet metal, moldings, household utensils and others with an aluminum content exceeding 98.5%. Free of free iron, rubber and plastic. Non-metallic impurities up to 1%.
510-1Aluminum soft painted / Taint/TaborPainted Aluminum sheet metal, moldings, household utensils and others with an Aluminum content exceeding 98.5%. Free of free iron, rubber and plastic. Non-metallic impurities up to 1%.
511Aluminum profiles and moldings, cleanAluminum profiles cleaned of plastics. Non-metallic admixtures up to 1%. Free from free iron. Thickness over 1 mm, maximum dimensions 1,500 mm.
511-1Aluminum profiles with thermobreakAluminum profiles not cleaned of plastics. Thickness above 1 mm, maximum dimensions 1,500 mm.
530Aluminum MixedAluminum castings, which contain automobile and other castings and details: cast, forged, stamped, scraps of sheets, strips, pipes, profiles and others. The castings are without visible iron, cleaned of brass, babbitt and other foreign materials. Lubricant, grease and other impurities up to 1%. Free iron up to 2%. Thickness over 1 mm. Maximum dimensions 1,500 x 600 x 300 mm.
532Aluminum Magnesium Alloy (AMG)Aluminum sheet with magnesium content from 1% to 5%. Free of zinc, manganese and copper.
533Aluminum radiators - automobileUsed clean aluminum car radiators. There should be no other types of radiators. All impurities, including iron, plastic and foam, must not exceed 1%.
533МAluminum-copper radiatorsAluminum radiators with copper pipes, cleaned of other metals and non-metals.
535Aluminum wheelsAluminum automobile wheels - clean, single, uncovered Aluminum wheels of a certain alloy, without inserts, steel, weights, rubber, grease, oil, or other non-metallic objects.
536Aluminum castings / TenseAll clean aluminum castings, which contain castings for cars or airplanes, other details - cast, forged, stamped. Free from iron, brass, dirt and other non-metallic elements. Oil and grease - no more than 2%.
540Aluminum offset plates / LithosheetsAluminum offset printing plates. Non-metallic admixtures and impurities up to 0.1%.
570Aluminum beverage cans / UBCAluminum soft drink cans without iron bottom.
580Aluminum caps and deodorantsAluminum caps from jars and deodorant bottles without iron bottom. Non-metallic admixtures up to 5%.
581Aluminum foil without paint and plasticsAluminum foil without paint and plastic. Non-metallic admixtures and impurities up to 1%.
590Aluminum turningsAluminum turnings, large, wound in spirals, not contaminated with iron or non-metallic impurities. Free of iron, sand, moisture and excessive oil.
CodeQualityDescription
820Nickel anodesUsed nickel anodes.
CodeQualityDescription
600Lead soft cleanLead from cable sheaths without asphalt coating. Lead pipes. Lead sheet metal.
605Lead from cables with asphaltLead from cable sheaths with asphalt coating.
608Lead lettersLead letters from the printing industry.
630Battery gridsLead accumulator grids, free of paste and plastic residue.
CodeQualityDescription
300ZAMAK / zink-aluminium-magnesium-copper /Zinc-based castings, with iron and other impurities not exceeding 5%. Must not contain shavings, pieces of slag, large pieces, melted pieces, free iron, etc.
300ZincZinc sheet metal, sheets, clean non-alloyed castings, anti-corrosion plates, wire, waste from the printing industry. Zinc-plated (galvanized, magnetic) sheet metal not accepted.

Nomenclature for waste stainless steel

CodeQualityDescription
830Stainless steel 9% NiChrome-nickel steel and pieces. Nickel content 9 ÷ 9.50%. Maximum dimensions 50 x 50 x 1500 mm or 70 x 70 x 90 mm. Non-magnetic.
830АStainless steel 10% NiChrome-nickel steel and pieces. Nickel content min 10%. Maximum dimensions 50 x 50 x 1500 mm or 70 x 70 x 90 mm. Non-magnetic.
831Stainless steel 8% NiChrome-nickel steel and pieces. Nickel content min. 8%. Maximum dimensions 50 x 50 x 1500 mm or 70 x 70 x 90 mm. Non-magnetic.
832Stainless steel from shredder (min. 3% quantitative discount)Chrome-nickel steel from shredded cars. Without traces of other metals, sand, moisture or excessive oil.
890Stainless steel turningsChrome-nickel steel turnings, uncontaminated and without iron and non-metallic impurities. Free of iron, sand, moisture or excessive oil.

Nomenclature for waste automobile batteries

CodeQualityDescription
620Lead-acid batteries with plastic box, automobileAutomobile lead-acid electrolyte accumulators, with intact case, with caps

Nomenclature for end-of-life motor vehicles (ELVs)

CodeTypeDescription
901Cars, trucks, buses and motorcycles delivered by natural personsELVs with a forged, deleted or damaged vehicle identification number shall not be accepted.
ELVs whose vehicle identification number is forged, deleted or damaged will not be accepted.
ELVs that have not been imported in accordance with the law or have been declared stolen shall not be bought until the vehicle ownership has been established.
Necessary documents upon handover:
Car registration certificate
ID card
Notarised power of attorney or a certificate of inheritance if the person delivering the ELV is not its owner
901Cars, trucks, buses and motorcycles delivered by legal entitiesCars, trucks, buses and motorcycles delivered by legal entities
ELVs whose vehicle identification number is forged, deleted or damaged will not be accepted.
ELVs that have not been imported in accordance with the law or have been declared stolen shall not be bought until the vehicle ownership has been established.
Necessary documents upon handover:
Car registration certificate
ID card
Notarised power of attorney from the company legal representative if the person delivering the ELV is not legal representative of the company
Scrapping protocol from the legal representative of the company
Invoice from the company selling the ELV

Nomenclature for waste oils

CodeTypeDescription
13 02 05*Mineral-based non-chlorinated engine, gear and lubricating oilsPackaging: metallic barrels 180 kg / 200 litres
Water: up to 1% of the barrel net weight
Not to contain:
Polychlorinated biphenyls (PCB), chlorine, mechanical impurities, antifreeze, brake fluid, sediments, fuels, fuel oil and solvents, as well as other harmful substances
13 02 06*Synthetic engine, gear and lubricating oilsPackaging: metallic barrels 180 kg / 200 litres
Water: up to 1% of the barell net weight
Not to contain:
Polychlorinated biphenyls (PCB), chlorine, mechanical impurities, antifreeze, brake fluid, sediments, fuels, fuel oil and solvents, as well as other harmful substances
13 02 08*Other engine, gear and lubricating oilsPackaging: metallic barrels 180 kg / 200 litres
Water: up to 1% of the net weight of the barrel
Not to contain:
Polychlorinated biphenyls (PCB), chlorine, mechanical impurities, antifreeze, brake fluid, sediments, fuels, fuel oil and solvents, as well as other harmful substances
13 01 10*Mineral based non-chlorinated hydraulic oilsPackaging: metallic barrels 180 kg / 200 litres
Water: up to 1% of the barrel net weight
Not to contain:
Polychlorinated biphenyls (PCB), chlorine, mechanical impurities, antifreeze, brake fluid, sediments, fuels, fuel oil and solvents, as well as other harmful substances

Nomenclature for hazardous wastes

CodeTypeDescription
16 01 07*Oil filters (metallic)Packaging: metal barrels
Waste oil: up to 7% of the net weight
Not to contain:
Mechanical impurities, antifreeze, brake fluid, sediments, fuels, fuel oil
15 01 10*Packaging containing residues of or contaminated by hazardous substancesPackaging: Thick plastic bags, tied and marked with the waste code
Hazardous substances: up to 2% of the net weight
Not to contain:
Other waste besides the mentioned, particularly household waste, as well as aerosol sprays
15 02 02*Absorbents, filter materials (including oil filters not otherwise specified), wiping cloths, protective clothing contaminated by hazardous substancesPackaging: Thick plastic bags, tied and marked with the waste code
Hazardous substances: up to 2% of the net weight
Not to contain:
Waste other than those mentioned.
16 01 13*Brake fluidsPackaging: 60 litre and 200 litre metal barrels
Water: up to 1% of the barrel net weight
Not to contain:
Mechanical impurities, used oils, sediments, fuels, fuel oil
16 01 14*Antifreeze fluids containing hazardous substancesPackaging: metal barrels 60 and 200 litres
Water: up to 5% of the net weight of the barrel
Not to contain:
Mechanical impurities, used oils, sediments, fuels, fuel oil
08 01 11*Waste paint and varnish containing organic solvents or other hazardous substancesPackaging: metal or plastic packaging of 5, 10, 20 kg.
Solvents: up to 1% of the net weight of the packaging
Not to contain:
Remains of paintbrushes and rollers, aerosol packaging, work gloves and parts of work clothes

Nomenclature for end-of-life tires (ELTs)

CodeQualityDescription
16 01 03End-of-Life TiresEnd-of-life tires from cars, trucks and buses
Not to contain:
Torn tires, as well as tires from construction, industrial and agricultural machines and forklifts

Nomenclature for waste electrical and electronic equipment (WEEE)

CodeTypeDescription
20Cooling equipmentAir conditioners, freezers, etc.
20Electronic equipmentComputers, monitors, laptops, keyboards, TVs, radios, etc.
20Copier and printer equipmentPrinters, computers, scanners, etc.
20Large household appliancesStoves, washing machines, dishwashers, boilers, radiators, etc.
20Small household appliancesMicrowave ovens, toasters, mixers, deep fryers, etc.

Nomenclature for waste portable and industrial batteries (WBA)

CodeQualityDescription
620Lead-acid batteries with plastic case, automobileIndustrial lead-acid electrolyte accumulators, with intact case, with caps
Where the case is iron, the weight of the same is paid at current steel scrap prices
621Lead UPS batteriesLead accumulators for UPS devices with plastic case Accumulators should be with intact case and with caps
640Portable nickel metal hydride (NiMH) batteriesNickel-metal hydride portable batteries, sorted.
642Portable alkaline, zinc-carbon and zinc-air batteriesAlkaline-manganese, zinc-carbon and zinc-air portable batteries, sorted

Nomenclature for waste textile and footwear

CodeTypeDescription
20 01 10ClothesAll kinds of old clothes and other household items made of textiles
20 01 11TextilesAny type of fabric produced by knitting, weaving or pressing various natural or man-made yarns
Secondary products resulting from the production process

Nomenclature for waste PVC joinery

CodeTypeDescription
17 02 03PVC joineryCuttings and pieces from production. To be free of shavings, dust and other impurities. Rubber seals can be up to 5% of the weight of the PVC joinery.
20 01 39PVC joinery Used PVC joinery from households. Windows and doors. Acceptable with glass, but that is not paid for. Acceptable with iron in the joinery, which is inbuilt in its production.